机子是 X2 5000+，2G，精英 A780G 主板，hd5450 卡，philips 190SW9。安装 13.1 默认的开源驱动一看到桌面后就死机了，只能关闭电源。可以从安全模式进入系统，但开源驱动还是不能启用 open gl，安装官方源里的闭源驱动后有些 openGL 桌面特效仍然无法启动。
老机就不追求特效了，但是我只给 / 分了 10G 空间（另分了 home 存数据），如果用闭源驱动空间就不太够了（9G 多，开源时 7G 左右），所以我还是想用开源驱动，麻烦各位给出出主意，先谢谢了。
=================================
原来显示器亮度问题已解决。
我们只能帮你调试开源显卡看到桌面就死机的问题。闭源显卡只有 ATI 自己有办法。你这种要求抱歉满足不了，你只能用 google 去英文搜索比如“ ati, hd5450, brightness" 这样的关键字看有没有 workaround。
来自 Galaxy Note 2 上的 Tapatalk 4
不晓得楼主怎么安装的闭源驱动
Sent from my GT-N7100 using Tapatalk
++++++++
" 开源显卡看到桌面就死机的问题" 的怎么解决呢？如果开源驱动能用的话我也愿意的
我没有 Ati 显卡的机器，所以你得看下你的 modprobe.d：
ls /etc/modprobe.d/
来自 Galaxy Note 2 上的 Tapatalk 4
#
# $Id$
#
# Listing a module here prevents modprobe from loading it via modalias (only
# aliases from /lib/modules/*/modules.alias). You may still load it explicitely.
# We blacklist some modules becaus they may harm on certain devices or they
# prevent other modules from grabbing the device.
#
# Syntax: blacklist <driver name>
# See 'man modprobe'.
#
# uhci ... usb-uhci handles the same pci class
blacklist uhci
# usbcore ... module is loaded implicitly, ignore it otherwise
blacklist usbcore
# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
blacklist de4x5
# At least 2.4.3 and later xircom_tulip doesn't have that conflict
# xircom_tulip_cb
blacklist dmfe
# list all framebuffer drivers, some of them tend to crash during boot
# they are either compiled into the kernel, or vesafb is active
# X works fine without them, rcfbset can load them if really required
# sed -e '/\/drivers\/video\/.*\.\(o\|ko\)$/{s@^.*/@@;s@\..*$@@;p};d'
blacklist aty128fb
blacklist atyfb
blacklist clgenfb
blacklist cyber2000fb
# cyblafb, bug 466280
blacklist cyblafb
blacklist encode-big5
blacklist encode-gb
blacklist encode-gbk
blacklist encode-jis
blacklist encode-kscm
blacklist fbcon-afb
blacklist fbcon-cfb2
blacklist fbcon-cfb4
blacklist fbcon-hga
blacklist fbcon-ilbm
blacklist fbcon-iplan2p2
blacklist fbcon-iplan2p4
blacklist fbcon-iplan2p8
blacklist fbcon-mac
blacklist fbcon-mfb
blacklist fbcon-vga
blacklist fbcon-vga-planes
blacklist fbgen
blacklist g450_pll
blacklist hgafb
blacklist i2c-matroxfb
blacklist i810fb
blacklist intelfbdrv
blacklist intelfbhw
blacklist matroxfb_accel
blacklist matroxfb_base
blacklist matroxfb_crtc2
blacklist matroxfb_DAC1064
blacklist matroxfb_g450
blacklist matroxfb_maven
blacklist matroxfb_misc
blacklist matroxfb_proc
blacklist matroxfb_Ti3026
blacklist mdacon
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist radeonfb
blacklist rivafb
blacklist sisfb
blacklist sstfb
blacklist tdfxfb
blacklist tridentfb
blacklist unikey
blacklist vga16fb
blacklist vgastate
blacklist vmware
# for kyrofb see Bug 35810
blacklist kyrofb
# list was not complete (bug 106715)
blacklist arcfb
blacklist backlight
blacklist lcd
blacklist cirrusfb
blacklist gx1fb
blacklist intelfb
blacklist macmodes
blacklist nvidiafb
blacklist s1d13xxxfb
blacklist savagefb
# additional modules since SLE11, bug 468964
blacklist arkfb
blacklist carminefb
blacklist gxfb
blacklist hecubafb
blacklist lxfb
blacklist s3fb
blacklist sm501fb
blacklist viafb
blacklist vmlfb
blacklist vt8623fb
#bug 846218
blacklist udlfb
# ISDN modules are load from /lib/udev/isdn.sh
blacklist fcusb
blacklist fcusb2
blacklist fxusb
blacklist fxusb_CZ
blacklist fcdslusb
blacklist fcdslusb2
blacklist fcdslusba
blacklist fcdslslusb
blacklist fcdslslusb2
blacklist e2220pc
blacklist e5520pc
blacklist bfusb
blacklist b1isa
blacklist b1pci
blacklist b1pcmcia
blacklist c4
blacklist t1isa
blacklist t1pci
blacklist divas
blacklist act2000
blacklist hfc_usb
blacklist hisax
blacklist hisax_fcpcipnp
blacklist hisax_st5481
blacklist hysdn
blacklist icn
blacklist pcbit
blacklist sc
blacklist tpam
blacklist fcpci
blacklist fcclassic
blacklist fcdsl
blacklist fcdsl2
# mISDN modules
blacklist hfcsusb
blacklist hfcpci
blacklist hfcmulti
blacklist l1oip
blacklist mISDN_dsp
blacklist mISDN_core
# OSS PCI sound modules
blacklist ad1889
blacklist ali5455
blacklist btaudio
blacklist cmpci
blacklist cs4281
blacklist emu10k1
blacklist es1370
blacklist es1371
blacklist esssolo1
blacklist forte
blacklist i810_audio
blacklist maestro
blacklist maestro3
blacklist nm256_audio
blacklist opl3sa2 # Bug 219758
blacklist rme96xx
blacklist sonicvibes
blacklist trident
blacklist via82cxxx_audio
blacklist ymfpci
# If you really need firewire direct networking, then remove this entry
blacklist eth1394
# this is a debugging module which should only be loaded manually
blacklist evbug
# These mtd drivers should be loaded manually.
blacklist scb2_flash
blacklist ich2rom
blacklist pci
blacklist l440gx
blacklist amd76xrom
# job of rcdvb
blacklist snd_bt87x
blacklist snd-bt87x
# HP Touch Screen usb input driver. breaks all other mouse input devices
blacklist tsdev
# https://bugzilla.novell.com/show_bug.cgi?id=115132
blacklist slamr
blacklist slusb
# This module seems to be good for nothing. See bug 129301.
blacklist dpt_i2o
# This driver is obsolete and should never be loaded as default.
# See https://bugzilla.novell.com/show_bug.cgi?id=146728
blacklist eepro100
# This driver is obsolete and should never be loaded as default.
# See https://bugzilla.novell.com/show_bug.cgi?id=146930
blacklist sk98lin
# This driver is rarely needed and causes trouble when scanning devices.
# See: https://bugzilla.novell.com/show_bug.cgi?id=144623
blacklist stradis
# These devices have bt878 chip without PCI Subsystem ID. Without that info bttv
# does not know how to treat them properly. Therefore we disable autoloading of
# modules for these devices.
# See https://bugzilla.novell.com/show_bug.cgi?id=149588
# To enable your device create a hardware configuration file for your device.
# See man hwup for details.
# You will probably have to specify an option to identify your card. Have a
# look in /usr/src/linux/Documentation/video4linux/CARDLIST.bttv.
alias pci:v0000109Ed0000036Esv00000000sd00000000bc04sc00i00 bttv_skip_it
alias pci:v0000109Ed00000878sv00000000sd00000000bc04sc80i00 bttv_skip_it
install bttv_skip_it echo "module alias skipped (bt878 chip without PCI Subsystem ID)"
# For some bridges both intel-agp and i82875p_edac are loaded. If i82875p_edac
# is loaded first it will grab the device. Then intel-agp doesn't work.
# Therefore we disable automatic loading of 82875p_edac. (Bug 213840)
blacklist i82875p_edac
#
# Blacklist the IBM s390 module for I/O dynamic configuration support
# Bug bnc#478601
blacklist chsc_sch
# uas has been confirmed to be hopelessly broken
# Bug bnc#770301
blacklist uas
同文件夹下还有个 50-fglrx.conf 文件，内容就一行
blacklist radeon
我刚刚又把源里的闭源驱动删除了，重启后在恢复模式里又重新安装了一遍，这是最新的
现在把 /etc/modprobe.d/50-fglrx.conf 文件改成这样：
blacklist fglrx
然后重启去黑屏。遇到黑屏之后，按 Ctrl + Alt + F1 切换到 tty 登录
sudo cp -r /var/log/Xorg.0.log ~/xorg.log
sudo vi /etc/modprobe.d/50-fglrx.conf
按 i 进入编辑模式，把内容再改成
blacklist radeon
按 :wq 保存。然后重启，这次不会黑屏，然后把用户主文件夹下的 xorg.log 传上来。
安装私有驱动不行么？
=====
不好意思上夜班几天没用这台有问题的电脑，不知道这样回复对不对
15.999]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
15.999]
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
15.999] X Protocol Version 11, Revision 0
15.999] Build Operating System: openSUSE SUSE LINUX
15.999] Current Operating System: Linux linux-a78s 3.11.6-4-desktop #1 SMP PREEMPT Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) x86_64
15.999] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.6-4-desktop root=UUID=9cfb9168-365e-41e2-8a84-d68ee74aa389 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
15.999] Build Date: 06 November 2013 10:07:38AM
15.999]
15.999] Current version of pixman: 0.30.2
15.999] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
15.999] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
15.999] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 12 21:17:06 2013
15.999] (==) Using config file: "/etc/X11/xorg.conf.install"
15.999] (==) Using config directory: "/etc/X11/xorg.conf.d"
15.999] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
16.052] (==) ServerLayout "Layout"
16.052] (**) |-->Screen "vboxvideo" (0)
16.052] (**) | |-->Monitor "<default monitor>"
16.052] (**) | |-->Device "vboxvideo"
16.052] (==) No monitor specified for screen "vboxvideo".
Using a default monitor configuration.
16.052] (**) |-->Screen "vmware" (1)
16.052] (**) | |-->Monitor "<default monitor>"
16.052] (**) | |-->Device "vmware"
16.052] (==) No monitor specified for screen "vmware".
Using a default monitor configuration.
16.052] (**) |-->Screen "modesetting" (2)
16.052] (**) | |-->Monitor "<default monitor>"
16.052] (**) | |-->Device "modesetting"
16.052] (==) No monitor specified for screen "modesetting".
Using a default monitor configuration.
16.052] (**) |-->Screen "fbdev" (3)
16.052] (**) | |-->Monitor "<default monitor>"
16.053] (**) | |-->Device "fbdev"
16.053] (==) No monitor specified for screen "fbdev".
Using a default monitor configuration.
16.053] (**) |-->Screen "vesa" (4)
16.053] (**) | |-->Monitor "<default monitor>"
16.053] (**) | |-->Device "vesa"
16.053] (==) No monitor specified for screen "vesa".
Using a default monitor configuration.
16.053] (==) Automatically adding devices
16.053] (==) Automatically enabling devices
16.053] (==) Automatically adding GPU devices
16.505] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
16.505] Entry deleted from font path.
16.542] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
16.542] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
16.542] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
16.542] (II) Loader magic: 0x803c20
16.542] (II) Module ABI versions:
16.542] X.Org ANSI C Emulation: 0.4
16.542] X.Org Video Driver: 14.1
16.542] X.Org XInput driver : 19.1
16.542] X.Org Server Extension : 7.0
16.544] (--) PCI:*(0:1:0:0) 1002:68f9:1642:3983 rev 0, Mem @ 0xd0000000/268435456, 0xfeae0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
16.544] Initializing built-in extension Generic Event Extension
16.544] Initializing built-in extension SHAPE
16.544] Initializing built-in extension MIT-SHM
16.544] Initializing built-in extension XInputExtension
16.544] Initializing built-in extension XTEST
16.544] Initializing built-in extension BIG-REQUESTS
16.544] Initializing built-in extension SYNC
16.544] Initializing built-in extension XKEYBOARD
16.544] Initializing built-in extension XC-MISC
16.544] Initializing built-in extension SECURITY
16.544] Initializing built-in extension XINERAMA
16.544] Initializing built-in extension XFIXES
16.544] Initializing built-in extension RENDER
16.544] Initializing built-in extension RANDR
16.544] Initializing built-in extension COMPOSITE
16.544] Initializing built-in extension DAMAGE
16.544] Initializing built-in extension MIT-SCREEN-SAVER
16.544] Initializing built-in extension DOUBLE-BUFFER
16.544] Initializing built-in extension RECORD
16.544] Initializing built-in extension DPMS
16.544] Initializing built-in extension X-Resource
16.544] Initializing built-in extension XVideo
16.544] Initializing built-in extension XVideo-MotionCompensation
16.544] Initializing built-in extension XFree86-VidModeExtension
16.544] Initializing built-in extension XFree86-DGA
16.544] Initializing built-in extension XFree86-DRI
16.544] Initializing built-in extension DRI2
16.544] (II) "glx" will be loaded by default.
16.544] (II) LoadModule: "dri2"
16.544] (II) Module "dri2" already built-in
16.544] (II) LoadModule: "glamoregl"
16.565] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
16.812] (EE) Failed to load /usr/lib64/xorg/modules/libglamoregl.so: /usr/lib64/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
16.812] (II) UnloadModule: "glamoregl"
16.812] (II) Unloading glamoregl
16.812] (EE) Failed to load module "glamoregl" (loader failed, 7)
16.812] (II) LoadModule: "glx"
16.813] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
16.817] (II) Module glx: vendor="Advanced Micro Devices, Inc."
16.817] compiled for 6.9.0, module version = 1.0.0
16.817] Loading extension GLX
16.817] (II) LoadModule: "vboxvideo"
16.862] (WW) Warning, couldn't open module vboxvideo
16.863] (II) UnloadModule: "vboxvideo"
16.863] (II) Unloading vboxvideo
16.863] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
16.863] (II) LoadModule: "vmware"
16.864] (WW) Warning, couldn't open module vmware
16.864] (II) UnloadModule: "vmware"
16.864] (II) Unloading vmware
16.864] (EE) Failed to load module "vmware" (module does not exist, 0)
16.864] (II) LoadModule: "modesetting"
16.867] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
16.878] (II) Module modesetting: vendor="X.Org Foundation"
16.878] compiled for 1.14.3, module version = 0.8.0
16.878] Module class: X.Org Video Driver
16.878] ABI class: X.Org Video Driver, version 14.1
16.878] (II) LoadModule: "fbdev"
16.878] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
16.879] (II) Module fbdev: vendor="X.Org Foundation"
16.879] compiled for 1.14.3, module version = 0.4.3
16.879] Module class: X.Org Video Driver
16.879] ABI class: X.Org Video Driver, version 14.1
16.879] (II) LoadModule: "vesa"
16.880] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
16.880] (II) Module vesa: vendor="X.Org Foundation"
16.880] compiled for 1.14.3, module version = 2.3.3
16.880] Module class: X.Org Video Driver
16.881] ABI class: X.Org Video Driver, version 14.1
16.881] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
16.881] (II) FBDEV: driver for framebuffer: fbdev
16.881] (II) VESA: driver for VESA chipsets: vesa
16.881] (++) using VT number 7
16.883] (EE) open /dev/dri/card0: No such file or directory
16.883] (WW) Falling back to old probe method for modesetting
16.883] (EE) open /dev/dri/card0: No such file or directory
16.883] (II) Loading sub module "fbdevhw"
16.883] (II) LoadModule: "fbdevhw"
16.883] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
16.885] (II) Module fbdevhw: vendor="X.Org Foundation"
16.885] compiled for 1.14.3.901, module version = 0.0.2
16.885] ABI class: X.Org Video Driver, version 14.1
16.885] (**) FBDEV(1): claimed PCI slot 1@0:0:0
16.885] (II) FBDEV(1): using default device
16.885] (WW) Falling back to old probe method for vesa
16.885] (EE) Screen 0 deleted because of no matching config section.
16.885] (II) UnloadModule: "modesetting"
16.886] (II) FBDEV(0): Creating default Display subsection in Screen section
"fbdev" for depth/fbbpp 24/32
16.886] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
16.886] (==) FBDEV(0): RGB weight 888
16.886] (==) FBDEV(0): Default visual is TrueColor
16.886] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
16.886] (II) FBDEV(0): hardware: VESA VGA (video memory: 3904kB)
16.886] (II) FBDEV(0): checking modes against framebuffer device...
16.886] (II) FBDEV(0): checking modes against monitor...
16.886] (--) FBDEV(0): Virtual size is 1152x864 (pitch 1152)
16.886] (**) FBDEV(0): Built-in mode "current": 99.5 MHz, 67.6 kHz, 76.2 Hz
16.886] (II) FBDEV(0): Modeline "current"x0.0 99.54 1152 1184 1328 1472 864 868 872 888 -hsync -vsync -csync (67.6 kHz b)
16.886] (==) FBDEV(0): DPI set to (96, 96)
16.886] (II) Loading sub module "fb"
16.886] (II) LoadModule: "fb"
16.886] (II) Loading /usr/lib64/xorg/modules/libfb.so
16.887] (II) Module fb: vendor="X.Org Foundation"
16.887] compiled for 1.14.3.901, module version = 1.0.0
16.887] ABI class: X.Org ANSI C Emulation, version 0.4
16.887] (**) FBDEV(0): using shadow framebuffer
16.887] (II) Loading sub module "shadow"
16.887] (II) LoadModule: "shadow"
16.888] (II) Loading /usr/lib64/xorg/modules/libshadow.so
16.913] (II) Module shadow: vendor="X.Org Foundation"
16.913] compiled for 1.14.3.901, module version = 1.1.0
16.913] ABI class: X.Org ANSI C Emulation, version 0.4
16.913] (II) UnloadModule: "vesa"
16.913] (II) Unloading vesa
16.913] (==) Depth 24 pixmap format is 32 bpp
16.913] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
16.913] (==) FBDEV(0): Backing store disabled
16.913] (==) FBDEV(0): DPMS enabled
16.913] (==) RandR enabled
16.920] (EE) GLX error: Can not get required symbols.
17.370] (II) config/udev: Adding input device Power Button (/dev/input/event3)
17.370] (**) Power Button: Applying InputClass "evdev keyboard catchall"
17.370] (**) Power Button: Applying InputClass "evdev keyboard catchall"
17.370] (**) Power Button: Applying InputClass "LocalKeyboard"
17.370] (II) LoadModule: "evdev"
17.370] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
17.388] (II) Module evdev: vendor="X.Org Foundation"
17.388] compiled for 1.14.3, module version = 2.8.2
17.388] Module class: X.Org XInput Driver
17.388] ABI class: X.Org XInput driver, version 19.1
17.388] (II) Using input driver 'evdev' for 'Power Button'
17.388] (**) Power Button: always reports core events
17.388] (**) evdev: Power Button: Device: "/dev/input/event3"
17.388] (--) evdev: Power Button: Vendor 0 Product 0x1
17.388] (--) evdev: Power Button: Found keys
17.388] (II) evdev: Power Button: Configuring as keyboard
17.388] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
17.388] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
17.388] (**) Option "xkb_rules" "evdev"
17.388] (**) Option "xkb_model" "pc104"
17.388] (**) Option "xkb_layout" "us"
17.433] (II) config/udev: Adding input device Power Button (/dev/input/event2)
17.433] (**) Power Button: Applying InputClass "evdev keyboard catchall"
17.433] (**) Power Button: Applying InputClass "evdev keyboard catchall"
17.433] (**) Power Button: Applying InputClass "LocalKeyboard"
17.433] (II) Using input driver 'evdev' for 'Power Button'
17.433] (**) Power Button: always reports core events
17.433] (**) evdev: Power Button: Device: "/dev/input/event2"
17.433] (--) evdev: Power Button: Vendor 0 Product 0x1
17.433] (--) evdev: Power Button: Found keys
17.433] (II) evdev: Power Button: Configuring as keyboard
17.433] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
17.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
17.433] (**) Option "xkb_rules" "evdev"
17.433] (**) Option "xkb_model" "pc104"
17.433] (**) Option "xkb_layout" "us"
17.433] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
17.433] (II) No input driver specified, ignoring this device.
17.434] (II) This device may have been added with another device file.
17.434] (II) config/udev: Adding input device Lenovo Optical USB Mouse (/dev/input/event1)
17.434] (**) Lenovo Optical USB Mouse: Applying InputClass "evdev pointer catchall"
17.434] (**) Lenovo Optical USB Mouse: Applying InputClass "evdev pointer catchall"
17.434] (II) Using input driver 'evdev' for 'Lenovo Optical USB Mouse'
17.434] (**) Lenovo Optical USB Mouse: always reports core events
17.434] (**) evdev: Lenovo Optical USB Mouse: Device: "/dev/input/event1"
17.434] (--) evdev: Lenovo Optical USB Mouse: Vendor 0x17ef Product 0x6019
17.434] (--) evdev: Lenovo Optical USB Mouse: Found 3 mouse buttons
17.434] (--) evdev: Lenovo Optical USB Mouse: Found scroll wheel(s)
17.434] (--) evdev: Lenovo Optical USB Mouse: Found relative axes
17.434] (--) evdev: Lenovo Optical USB Mouse: Found x and y relative axes
17.434] (II) evdev: Lenovo Optical USB Mouse: Configuring as mouse
17.434] (II) evdev: Lenovo Optical USB Mouse: Adding scrollwheel support
17.434] (**) evdev: Lenovo Optical USB Mouse: YAxisMapping: buttons 4 and 5
17.434] (**) evdev: Lenovo Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
17.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input1/event1"
17.434] (II) XINPUT: Adding extended input device "Lenovo Optical USB Mouse" (type: MOUSE, id 8)
17.434] (II) evdev: Lenovo Optical USB Mouse: initialized for relative axes.
17.435] (**) Lenovo Optical USB Mouse: (accel) keeping acceleration scheme 1
17.435] (**) Lenovo Optical USB Mouse: (accel) acceleration profile 0
17.435] (**) Lenovo Optical USB Mouse: (accel) acceleration factor: 2.000
17.435] (**) Lenovo Optical USB Mouse: (accel) acceleration threshold: 4
17.435] (II) config/udev: Adding input device Lenovo Optical USB Mouse (/dev/input/mouse0)
17.435] (II) No input driver specified, ignoring this device.
17.435] (II) This device may have been added with another device file.
17.435] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
17.435] (II) No input driver specified, ignoring this device.
17.435] (II) This device may have been added with another device file.
17.436] (II) config/udev: Adding input device HDA ATI SB Speaker Front (/dev/input/event10)
17.436] (II) No input driver specified, ignoring this device.
17.436] (II) This device may have been added with another device file.
17.436] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event11)
17.436] (II) No input driver specified, ignoring this device.
17.436] (II) This device may have been added with another device file.
17.436] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event12)
17.436] (II) No input driver specified, ignoring this device.
17.436] (II) This device may have been added with another device file.
17.437] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event13)
17.437] (II) No input driver specified, ignoring this device.
17.437] (II) This device may have been added with another device file.
17.437] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event6)
17.437] (II) No input driver specified, ignoring this device.
17.437] (II) This device may have been added with another device file.
17.437] (II) config/udev: Adding input device HDA ATI SB Speaker Side (/dev/input/event7)
17.437] (II) No input driver specified, ignoring this device.
17.437] (II) This device may have been added with another device file.
17.437] (II) config/udev: Adding input device HDA ATI SB Speaker CLFE (/dev/input/event8)
17.438] (II) No input driver specified, ignoring this device.
17.438] (II) This device may have been added with another device file.
17.438] (II) config/udev: Adding input device HDA ATI SB Speaker Surround (/dev/input/event9)
17.438] (II) No input driver specified, ignoring this device.
17.438] (II) This device may have been added with another device file.
17.438] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
17.438] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
17.438] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
17.438] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
17.438] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
17.438] (**) AT Translated Set 2 keyboard: always reports core events
17.438] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
17.438] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
17.438] (--) evdev: AT Translated Set 2 keyboard: Found keys
17.438] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
17.438] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
17.438] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
17.438] (**) Option "xkb_rules" "evdev"
17.438] (**) Option "xkb_model" "pc104"
17.438] (**) Option "xkb_layout" "us"
17.439] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
17.439] (II) No input driver specified, ignoring this device.
17.439] (II) This device may have been added with another device file.
17.446] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
32.649] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
32.649] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
32.733] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
对了，改文件重启后不是黑屏，是白花花的，也进不了 tty，我又重启了一次进入修复模式，才复制的 log 文件
修改过在后面了，我自己来顶一下
不是，硬盘的最后面分了三个区，分别挂 swap /home , 和 Windows 7 组的双系统。
@smagician 仔细看了一下，你的 xorg.log 文件不对
showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
这是恢复模式才会有的 grub2 引导选项。
建议你在黑屏后把：
/var/log/Xorg.0.log
/var/log/Xorg.0.log.old
/var/log/Xorg.1.log
只要有的全部发出来。
谢谢了，可是我现在又换了块 hd4350 的卡，已经可以正常使用开源驱动了