[ 求助 ]kde 桌面启动异常及经常挂掉

机型 LENOVO G480
如图是正常的启动画面(PS:忽略我的手的倒影)

!](http://bcs.duapp.com/zzy8200/blog/201308/2013-08-23-203013.jpg)

我在未安装Broadcom,Atheros,nvidia驱动前启动画面是正常的。
现在开机后启动画面正常一会儿后会鞭策这样(先是出现黑线,再是分屏)

!](http://bcs.duapp.com/zzy8200/blog/201308/2013-08-23-202609.jpg)

!](http://bcs.duapp.com/zzy8200/blog/201308/2013-08-23-203022.jpg)

其实这样也不影响使用,主要是KDE桌面经常挂掉,什么都动不了(鼠标啊,键盘啊。。。。。。) 我估计是N卡的问题
附在20:02分挂掉的时候的log

2013-08-23T20:02:57.996310+08:00 linux-5b29 kernel:     0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
2013-08-23T20:02:57.996311+08:00 linux-5b29 kernel:     0.000000] ACPI: XSDT 00000000baffe210 000A4 (v01 LENOVO CB-01    00000001      01000013)
2013-08-23T20:02:57.996312+08:00 linux-5b29 kernel:     0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996314+08:00 linux-5b29 kernel:     0.000000] ACPI: DSDT 00000000bafee000 09755 (v01 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996315+08:00 linux-5b29 kernel:     0.000000] ACPI: FACS 00000000bafbb000 00040
2013-08-23T20:02:57.996316+08:00 linux-5b29 kernel:     0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996317+08:00 linux-5b29 kernel:     0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996318+08:00 linux-5b29 kernel:     0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996319+08:00 linux-5b29 kernel:     0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996320+08:00 linux-5b29 kernel:     0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996322+08:00 linux-5b29 kernel:     0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996323+08:00 linux-5b29 kernel:     0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01    00001000 ACPI 00040000)
2013-08-23T20:02:57.996324+08:00 linux-5b29 kernel:     0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996324+08:00 linux-5b29 kernel:     0.000000] ACPI: SSDT 00000000bafe9000 00C0A (v01 LENOVO CB-01    00001000 ACPI 00040000)
2013-08-23T20:02:57.996325+08:00 linux-5b29 kernel:     0.000000] ACPI: SSDT 00000000bafe8000 00696 (v01 LENOVO CB-01    00001000 ACPI 00040000)
2013-08-23T20:02:57.996326+08:00 linux-5b29 kernel:     0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996327+08:00 linux-5b29 kernel:     0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
2013-08-23T20:02:57.996329+08:00 linux-5b29 kernel:     0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01    00003000 ACPI 00040000)
2013-08-23T20:02:57.996330+08:00 linux-5b29 kernel:     0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01    00003000 ACPI 00040000)
2013-08-23T20:02:57.996331+08:00 linux-5b29 kernel:     0.000000] ACPI: SSDT 00000000bafdf000 01EDD (v01 LENOVO CB-01    00001000 ACPI 00040000)
2013-08-23T20:02:57.996340+08:00 linux-5b29 kernel:     0.000000] Zone ranges:
2013-08-23T20:02:57.996341+08:00 linux-5b29 kernel:     0.000000]   DMA      [mem 0x00010000-0x00ffffff]
2013-08-23T20:02:57.996342+08:00 linux-5b29 kernel:     0.000000]   DMA32    [mem 0x01000000-0xffffffff]
2013-08-23T20:02:57.996343+08:00 linux-5b29 kernel:     0.000000]   Normal   [mem 0x100000000-0x13f5fffff]
2013-08-23T20:02:57.996344+08:00 linux-5b29 kernel:     0.000000] Movable zone start for each node
2013-08-23T20:02:57.996345+08:00 linux-5b29 kernel:     0.000000] Early memory node ranges
2013-08-23T20:02:57.996348+08:00 linux-5b29 kernel:     0.000000]   node   0: [mem 0x00010000-0x0009cfff]
2013-08-23T20:02:57.996349+08:00 linux-5b29 kernel:     0.000000]   node   0: [mem 0x00100000-0x1fffffff]
2013-08-23T20:02:57.996350+08:00 linux-5b29 kernel:     0.000000]   node   0: [mem 0x20200000-0x40003fff]
2013-08-23T20:02:57.996351+08:00 linux-5b29 kernel:     0.000000]   node   0: [mem 0x40005000-0xbaabefff]
2013-08-23T20:02:57.996352+08:00 linux-5b29 kernel:     0.000000]   node   0: [mem 0xbafff000-0xbaffffff]
2013-08-23T20:02:57.996353+08:00 linux-5b29 kernel:     0.000000]   node   0: [mem 0x100000000-0x13f5fffff]
2013-08-23T20:02:57.996476+08:00 linux-5b29 kernel:     0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1005673
2013-08-23T20:02:57.996477+08:00 linux-5b29 kernel:     0.000000] Policy zone: Normal
2013-08-23T20:02:57.996517+08:00 linux-5b29 kernel:     0.001884] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
2013-08-23T20:02:57.996518+08:00 linux-5b29 kernel:     0.001884] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
2013-08-23T20:02:57.996602+08:00 linux-5b29 kernel:     0.197422] mtrr: your CPUs had inconsistent variable MTRR settings
2013-08-23T20:02:57.996612+08:00 linux-5b29 kernel:     0.201556] ACPI: Executed 1 blocks of module-level executable AML code
2013-08-23T20:02:57.996614+08:00 linux-5b29 kernel:     0.206533] ACPI: SSDT 00000000bae18018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
2013-08-23T20:02:57.996615+08:00 linux-5b29 kernel:     0.206981] ACPI: Dynamic OEM Table Load:
2013-08-23T20:02:57.996616+08:00 linux-5b29 kernel:     0.206983] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
2013-08-23T20:02:57.996617+08:00 linux-5b29 kernel:     0.207292] ACPI: SSDT 00000000bae19a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
2013-08-23T20:02:57.996619+08:00 linux-5b29 kernel:     0.207785] ACPI: Dynamic OEM Table Load:
2013-08-23T20:02:57.996620+08:00 linux-5b29 kernel:     0.207787] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
2013-08-23T20:02:57.996621+08:00 linux-5b29 kernel:     0.207918] ACPI: SSDT 00000000bae17d98 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
2013-08-23T20:02:57.996622+08:00 linux-5b29 kernel:     0.208360] ACPI: Dynamic OEM Table Load:
2013-08-23T20:02:57.996623+08:00 linux-5b29 kernel:     0.208362] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
2013-08-23T20:02:57.997150+08:00 linux-5b29 kernel:     0.778051] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
2013-08-23T20:02:57.997362+08:00 linux-5b29 kernel:     1.977860]  P0 P2 P1 P3 ]
2013-08-23T20:02:57.997375+08:00 linux-5b29 kernel:     2.128982]  P0 -- P1 -- ]
2013-08-23T20:02:57.997408+08:00 linux-5b29 kernel:     3.134722] ata2.00: failed to resume link (SControl 30)
2013-08-23T20:02:57.997409+08:00 linux-5b29 kernel:     4.140406] ata2.01: failed to resume link (SControl 30)
2013-08-23T20:02:57.997528+08:00 linux-5b29 kernel:    16.441547] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
2013-08-23T20:02:57.997545+08:00 linux-5b29 kernel:    16.643296] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
2013-08-23T20:02:57.997548+08:00 linux-5b29 kernel:    16.674128] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
2013-08-23T20:02:57.997554+08:00 linux-5b29 kernel:    16.862391] kvm: disabled by bios
2013-08-23T20:02:57.997563+08:00 linux-5b29 kernel:    16.877467] wl: module license 'unspecified' taints kernel.
2013-08-23T20:02:57.997564+08:00 linux-5b29 kernel:    16.877470] Disabling lock debugging due to kernel taint
2013-08-23T20:02:57.997566+08:00 linux-5b29 kernel:    16.878839] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
2013-08-23T20:02:57.997569+08:00 linux-5b29 kernel:    16.878941] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
2013-08-23T20:02:57.997574+08:00 linux-5b29 kernel:    16.878947] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
2013-08-23T20:02:57.997575+08:00 linux-5b29 kernel:    16.878949] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120913/utaddress-251)
2013-08-23T20:02:57.997577+08:00 linux-5b29 kernel:    16.878952] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
2013-08-23T20:02:57.997580+08:00 linux-5b29 kernel:    16.878954] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120913/utaddress-251)
2013-08-23T20:02:57.997582+08:00 linux-5b29 kernel:    16.878956] lpc_ich: Resource conflict(s) found affecting gpio_ich
2013-08-23T20:02:57.997634+08:00 linux-5b29 kernel:    16.909069] eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
2013-08-23T20:02:57.997635+08:00 linux-5b29 kernel:    16.909855] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.
2013-08-23T20:02:57.997643+08:00 linux-5b29 kernel:    16.969536] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
2013-08-23T20:02:57.997657+08:00 linux-5b29 kernel:    17.045473] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
2013-08-23T20:02:57.997700+08:00 linux-5b29 kernel:    18.122173] nouveau E  DEVICE][0000:01:00.0] unknown chipset, 0x0d7000a2
2013-08-23T20:02:57.997701+08:00 linux-5b29 kernel:    18.122177] nouveau E     DRM] failed to create 0x80000080, -22
2013-08-23T20:02:57.997702+08:00 linux-5b29 kernel:    18.122502] nouveau: probe of 0000:01:00.0 failed with error -22
2013-08-23T20:02:57.997699+08:00 linux-5b29 kernel:    18.122165] nouveau !  DEVICE][0000:01:00.0] unknown Fermi chipset
2013-08-23T20:02:58.957548+08:00 linux-5b29 kdm_config[576]: Multiple occurrences of key 'UseTheme' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc

现N卡驱动已删除并去源,开机画面还是这样的问题
附 cat /var/log/X* | grep EE

    18.420] Current Operating System: Linux linux-5b29.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    19.534] Initializing built-in extension MIT-SCREEN-SAVER
    20.242] Current Operating System: Linux linux-5b29.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    21.603] Initializing built-in extension MIT-SCREEN-SAVER

需要其它日志请提示,谢谢。

N 卡的错误不熟悉
是 optimus 不?请贴 lspci
还有 Xorg.o.log 里挑出来的这几句没用,别 grep 了,整段地贴吧(篇幅太长就从后面开始贴)

1赞

我已经在软件添加/删除里面把N卡有关的全删了。到目前木有卡死过,但是黑线,分屏依旧
lspci结果

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 7 Series Chipset Family 4-port SATA Controller [IDE mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.5 IDE interface: Intel Corporation 7 Series Chipset Family 2-port SATA Controller [IDE mode] (rev 04)
01:00.0 3D controller: NVIDIA Corporation Device 1140 (rev a1)
03:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08)
04:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)

Xorg.0.log文件

    21.309] 
X.Org X Server 1.13.2
Release Date: 2013-01-24
    21.454] X Protocol Version 11, Revision 0
    21.454] Build Operating System: openSUSE SUSE LINUX
    21.454] Current Operating System: Linux linux-5b29.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64
    21.454] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.16-desktop root=UUID=8540e8b6-ddc4-4882-8f73-12b31c89f96f resume=/dev/disk/by-id/ata-ST9500325AS_S2WKPXEH-part7 splash=silent quiet showopts
    21.454] Build Date: 15 July 2013  12:22:00PM
    21.454]  
    21.454] Current version of pixman: 0.28.2
    21.454] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
    21.454] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    21.455] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 23 22:25:30 2013
    22.098] (==) Using config directory: "/etc/X11/xorg.conf.d"
    22.098] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    22.316] (==) No Layout section.  Using the first Screen section.
    22.316] (==) No screen section available. Using defaults.
    22.316] (**) |-->Screen "Default Screen Section" (0)
    22.316] (**) |   |-->Monitor "<default monitor>"
    22.461] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
    22.461] (==) Automatically adding devices
    22.461] (==) Automatically enabling devices
    22.461] (==) Automatically adding GPU devices
    22.583] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    22.583] 	Entry deleted from font path.
    22.597] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/ghostscript/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/,
	built-ins
    22.597] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
    22.597] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
    22.597] (II) Loader magic: 0x801c20
    22.597] (II) Module ABI versions:
    22.597] 	X.Org ANSI C Emulation: 0.4
    22.597] 	X.Org Video Driver: 13.1
    22.597] 	X.Org XInput driver : 18.0
    22.597] 	X.Org Server Extension : 7.0
    22.597] (II) config/udev: Adding drm device (/dev/dri/card0)
    23.341] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3901 rev 9, Mem @ 0xd3000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
    23.341] (--) PCI: (0:1:0:0) 10de:1140:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
    23.342] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    23.342] Initializing built-in extension Generic Event Extension
    23.342] Initializing built-in extension SHAPE
    23.342] Initializing built-in extension MIT-SHM
    23.342] Initializing built-in extension XInputExtension
    23.342] Initializing built-in extension XTEST
    23.342] Initializing built-in extension BIG-REQUESTS
    23.342] Initializing built-in extension SYNC
    23.342] Initializing built-in extension XKEYBOARD
    23.342] Initializing built-in extension XC-MISC
    23.342] Initializing built-in extension SECURITY
    23.342] Initializing built-in extension XINERAMA
    23.342] Initializing built-in extension XFIXES
    23.342] Initializing built-in extension RENDER
    23.342] Initializing built-in extension RANDR
    23.342] Initializing built-in extension COMPOSITE
    23.342] Initializing built-in extension DAMAGE
    23.342] Initializing built-in extension MIT-SCREEN-SAVER
    23.342] Initializing built-in extension DOUBLE-BUFFER
    23.342] Initializing built-in extension RECORD
    23.342] Initializing built-in extension DPMS
    23.342] Initializing built-in extension X-Resource
    23.342] Initializing built-in extension XVideo
    23.342] Initializing built-in extension XVideo-MotionCompensation
    23.342] Initializing built-in extension XFree86-VidModeExtension
    23.342] Initializing built-in extension XFree86-DGA
    23.342] Initializing built-in extension XFree86-DRI
    23.342] Initializing built-in extension DRI2
    23.342] (II) "glx" will be loaded by default.
    23.342] (II) LoadModule: "dri2"
    23.342] (II) Module "dri2" already built-in
    23.342] (II) LoadModule: "glamoregl"
    23.387] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
    23.713] (II) Module glamoregl: vendor="X.Org Foundation"
    23.713] 	compiled for 1.13.2, module version = 0.5.0
    23.713] 	ABI class: X.Org ANSI C Emulation, version 0.4
    23.713] (II) LoadModule: "glx"
    23.713] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
    23.713] (II) Module glx: vendor="X.Org Foundation"
    23.713] 	compiled for 1.13.2, module version = 1.0.0
    23.713] 	ABI class: X.Org Server Extension, version 7.0
    23.713] (==) AIGLX enabled
    23.713] Loading extension GLX
    23.713] (==) Matched intel as autoconfigured driver 0
    23.713] (==) Matched intel as autoconfigured driver 1
    23.713] (==) Matched modesetting as autoconfigured driver 2
    23.713] (==) Matched fbdev as autoconfigured driver 3
    23.713] (==) Matched vesa as autoconfigured driver 4
    23.713] (==) Assigned the driver to the xf86ConfigLayout
    23.713] (II) LoadModule: "intel"
    23.714] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
    23.760] (II) Module intel: vendor="X.Org Foundation"
    23.760] 	compiled for 1.13.1, module version = 2.20.19
    23.760] 	Module class: X.Org Video Driver
    23.760] 	ABI class: X.Org Video Driver, version 13.1
    23.760] (II) LoadModule: "modesetting"
    23.760] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
    23.760] (II) Module modesetting: vendor="X.Org Foundation"
    23.760] 	compiled for 1.13.2, module version = 0.8.0
    23.760] 	Module class: X.Org Video Driver
    23.760] 	ABI class: X.Org Video Driver, version 13.1
    23.760] (II) LoadModule: "fbdev"
    23.760] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
    23.760] (II) Module fbdev: vendor="X.Org Foundation"
    23.760] 	compiled for 1.13.1, module version = 0.4.3
    23.760] 	Module class: X.Org Video Driver
    23.760] 	ABI class: X.Org Video Driver, version 13.1
    23.760] (II) LoadModule: "vesa"
    23.761] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
    23.761] (II) Module vesa: vendor="X.Org Foundation"
    23.761] 	compiled for 1.13.1, module version = 2.3.2
    23.761] 	Module class: X.Org Video Driver
    23.761] 	ABI class: X.Org Video Driver, version 13.1
    23.761] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
    23.761] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    23.761] (II) FBDEV: driver for framebuffer: fbdev
    23.761] (II) VESA: driver for VESA chipsets: vesa
    23.761] (++) using VT number 7

    23.761] (WW) Falling back to old probe method for modesetting
    23.761] (WW) Falling back to old probe method for fbdev
    23.761] (II) Loading sub module "fbdevhw"
    23.761] (II) LoadModule: "fbdevhw"
    23.762] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
    23.762] (II) Module fbdevhw: vendor="X.Org Foundation"
    23.762] 	compiled for 1.13.2, module version = 0.0.2
    23.762] 	ABI class: X.Org Video Driver, version 13.1
    23.762] (WW) Falling back to old probe method for vesa
    23.762] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
    23.762] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    23.762] (==) intel(0): RGB weight 888
    23.762] (==) intel(0): Default visual is TrueColor
    23.762] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    23.762] (**) intel(0): Relaxed fencing enabled
    23.762] (**) intel(0): Wait on SwapBuffers? enabled
    23.762] (**) intel(0): Triple buffering? enabled
    23.762] (**) intel(0): Framebuffer tiled
    23.762] (**) intel(0): Pixmaps tiled
    23.762] (**) intel(0): 3D buffers tiled
    23.762] (**) intel(0): SwapBuffers wait enabled
    23.762] (==) intel(0): video overlay key set to 0x101fe
    23.762] (II) intel(0): Output LVDS1 has no monitor section
    23.762] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
    23.766] (II) intel(0): Output VGA1 has no monitor section
    23.767] (II) intel(0): Output HDMI1 has no monitor section
    23.791] (II) intel(0): Output DP1 has no monitor section
    23.791] (II) intel(0): EDID for output LVDS1
    23.791] (II) intel(0): Manufacturer: LGD  Model: 33c  Serial#: 0
    23.791] (II) intel(0): Year: 2011  Week: 0
    23.791] (II) intel(0): EDID Version: 1.3
    23.791] (II) intel(0): Digital Display Input
    23.791] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
    23.791] (II) intel(0): Gamma: 2.20
    23.791] (II) intel(0): No DPMS capabilities specified
    23.791] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    23.791] (II) intel(0): First detailed timing is preferred mode
    23.791] (II) intel(0): redX: 0.588 redY: 0.346   greenX: 0.342 greenY: 0.556
    23.791] (II) intel(0): blueX: 0.156 blueY: 0.123   whiteX: 0.313 whiteY: 0.329
    23.791] (II) intel(0): Manufacturer's mask: 0
    23.791] (II) intel(0): Supported detailed timing:
    23.791] (II) intel(0): clock: 70.0 MHz   Image Size:  309 x 174 mm
    23.791] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
    23.791] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
    23.791] (II) intel(0):  LG Display
    23.791] (II) intel(0):  LP140WH4-TLN1
    23.791] (II) intel(0): EDID (in hex):
    23.791] (II) intel(0): 	00ffffffffffff0030e43c0300000000
    23.791] (II) intel(0): 	00150103801f11780aa9259658578e28
    23.791] (II) intel(0): 	1f505400000001010101010101010101
    23.791] (II) intel(0): 	010101010101581b567e50000e302430
    23.791] (II) intel(0): 	350035ae100000190000000000000000
    23.791] (II) intel(0): 	00000000000000000000000000fe004c
    23.791] (II) intel(0): 	4720446973706c61790a2020000000fe
    23.791] (II) intel(0): 	004c503134305748342d544c4e310043
    23.791] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    23.791] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    23.791] (II) intel(0): Printing probed modes for output LVDS1
    23.791] (II) intel(0): Modeline "1366x768"x60.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
    23.791] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
    23.791] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
    23.791] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
    23.791] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
    23.795] (II) intel(0): EDID for output VGA1
    23.796] (II) intel(0): EDID for output HDMI1
    23.821] (II) intel(0): EDID for output DP1
    23.821] (II) intel(0): Output LVDS1 connected
    23.821] (II) intel(0): Output VGA1 disconnected
    23.821] (II) intel(0): Output HDMI1 disconnected
    23.821] (II) intel(0): Output DP1 disconnected
    23.821] (II) intel(0): Using exact sizes for initial modes
    23.821] (II) intel(0): Output LVDS1 using initial mode 1366x768
    23.821] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    23.821] (II) intel(0): Kernel page flipping support detected, enabling
    23.821] (==) intel(0): DPI set to (96, 96)
    23.821] (II) Loading sub module "fb"
    23.821] (II) LoadModule: "fb"
    23.821] (II) Loading /usr/lib64/xorg/modules/libfb.so
    23.821] (II) Module fb: vendor="X.Org Foundation"
    23.821] 	compiled for 1.13.2, module version = 1.0.0
    23.821] 	ABI class: X.Org ANSI C Emulation, version 0.4
    23.821] (II) Loading sub module "glamoregl"
    23.821] (II) LoadModule: "glamoregl"
    23.821] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
    23.821] (II) Module glamoregl: vendor="X.Org Foundation"
    23.821] 	compiled for 1.13.2, module version = 0.5.0
    23.821] 	ABI class: X.Org ANSI C Emulation, version 0.4
    23.821] (II) glamor: OpenGL accelerated X.org driver based.
    23.973] (II) glamor: EGL version 1.4 (DRI2):
    24.203] (II) intel(0): glamor detected, initialising egl layer.
    24.203] (II) Loading sub module "dri2"
    24.203] (II) LoadModule: "dri2"
    24.203] (II) Module "dri2" already built-in
    24.203] (II) UnloadModule: "modesetting"
    24.203] (II) Unloading modesetting
    24.203] (II) UnloadModule: "fbdev"
    24.203] (II) Unloading fbdev
    24.203] (II) UnloadSubModule: "fbdevhw"
    24.203] (II) Unloading fbdevhw
    24.203] (II) UnloadModule: "vesa"
    24.203] (II) Unloading vesa
    24.203] (==) Depth 24 pixmap format is 32 bpp
    24.203] (II) intel(0): [DRI2] Setup complete
    24.203] (II) intel(0): [DRI2]   DRI driver: i965
    24.203] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    24.204] (II) UXA(0): Driver registered support for the following operations:
    24.204] (II)         solid
    24.204] (II)         copy
    24.204] (II)         composite (RENDER acceleration)
    24.204] (II)         put_image
    24.204] (II)         get_image
    24.204] (==) intel(0): Backing store disabled
    24.204] (==) intel(0): Silken mouse enabled
    24.204] (II) intel(0): Initializing HW Cursor
    24.204] (II) intel(0): Use standard UXA acceleration.
    24.204] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    24.205] (==) intel(0): DPMS enabled
    24.205] (==) intel(0): Intel XvMC decoder enabled
    24.205] (II) intel(0): Set up textured video
    24.205] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    24.205] (II) intel(0): direct rendering: DRI2 Enabled
    24.205] (==) intel(0): hotplug detection: "enabled"
    24.226] (--) RandR disabled
    24.230] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    24.230] (II) AIGLX: enabled GLX_INTEL_swap_event
    24.230] (II) AIGLX: enabled GLX_ARB_create_context
    24.230] (II) AIGLX: enabled GLX_ARB_create_context_profile
    24.230] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    24.230] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    24.230] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    24.230] (II) AIGLX: Loaded and initialized i965
    24.230] (II) GLX: Initialized DRI2 GL provider for screen 0
    24.231] (II) intel(0): Setting screen physical size to 361 x 203
    25.766] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    25.766] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    25.766] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    25.766] (**) Power Button: Applying InputClass "LocalKeyboard"
    25.766] (II) LoadModule: "evdev"
    25.766] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
    25.826] (II) Module evdev: vendor="X.Org Foundation"
    25.826] 	compiled for 1.13.1, module version = 2.7.3
    25.827] 	Module class: X.Org XInput Driver
    25.827] 	ABI class: X.Org XInput driver, version 18.0
    25.827] (II) Using input driver 'evdev' for 'Power Button'
    25.827] (**) Power Button: always reports core events
    25.827] (**) evdev: Power Button: Device: "/dev/input/event6"
    25.827] (--) evdev: Power Button: Vendor 0 Product 0x1
    25.827] (--) evdev: Power Button: Found keys
    25.827] (II) evdev: Power Button: Configuring as keyboard
    25.827] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    25.827] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    25.827] (**) Option "xkb_rules" "evdev"
    25.827] (**) Option "xkb_model" "evdev"
    25.827] (**) Option "xkb_layout" "us"
    25.845] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    25.845] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    25.845] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    25.845] (**) Video Bus: Applying InputClass "LocalKeyboard"
    25.845] (II) Using input driver 'evdev' for 'Video Bus'
    25.845] (**) Video Bus: always reports core events
    25.845] (**) evdev: Video Bus: Device: "/dev/input/event10"
    25.845] (--) evdev: Video Bus: Vendor 0 Product 0x6
    25.845] (--) evdev: Video Bus: Found keys
    25.845] (II) evdev: Video Bus: Configuring as keyboard
    25.845] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event10"
    25.845] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    25.845] (**) Option "xkb_rules" "evdev"
    25.845] (**) Option "xkb_model" "evdev"
    25.845] (**) Option "xkb_layout" "us"
    25.845] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    25.845] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    25.845] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    25.845] (**) Power Button: Applying InputClass "LocalKeyboard"
    25.845] (II) Using input driver 'evdev' for 'Power Button'
    25.845] (**) Power Button: always reports core events
    25.845] (**) evdev: Power Button: Device: "/dev/input/event3"
    25.845] (--) evdev: Power Button: Vendor 0 Product 0x1
    25.845] (--) evdev: Power Button: Found keys
    25.845] (II) evdev: Power Button: Configuring as keyboard
    25.846] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3/event3"
    25.846] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    25.846] (**) Option "xkb_rules" "evdev"
    25.846] (**) Option "xkb_model" "evdev"
    25.846] (**) Option "xkb_layout" "us"
    25.846] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
    25.846] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    25.846] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    25.846] (**) Sleep Button: Applying InputClass "LocalKeyboard"
    25.846] (II) Using input driver 'evdev' for 'Sleep Button'
    25.846] (**) Sleep Button: always reports core events
    25.846] (**) evdev: Sleep Button: Device: "/dev/input/event4"
    25.846] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    25.846] (--) evdev: Sleep Button: Found keys
    25.846] (II) evdev: Sleep Button: Configuring as keyboard
    25.846] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4/event4"
    25.846] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    25.846] (**) Option "xkb_rules" "evdev"
    25.846] (**) Option "xkb_model" "evdev"
    25.846] (**) Option "xkb_layout" "us"
    25.846] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    25.846] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    25.846] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    25.846] (**) Video Bus: Applying InputClass "LocalKeyboard"
    25.846] (II) Using input driver 'evdev' for 'Video Bus'
    25.846] (**) Video Bus: always reports core events
    25.846] (**) evdev: Video Bus: Device: "/dev/input/event9"
    25.846] (--) evdev: Video Bus: Vendor 0 Product 0x6
    25.846] (--) evdev: Video Bus: Found keys
    25.846] (II) evdev: Video Bus: Configuring as keyboard
    25.846] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input9/event9"
    25.846] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
    25.846] (**) Option "xkb_rules" "evdev"
    25.846] (**) Option "xkb_model" "evdev"
    25.846] (**) Option "xkb_layout" "us"
    25.847] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
    25.847] (II) No input driver specified, ignoring this device.
    25.847] (II) This device may have been added with another device file.
    25.847] (II) config/udev: Adding drm device (/dev/dri/card0)
    25.847] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event1)
    25.847] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    25.847] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    25.847] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    25.847] (**)  USB OPTICAL MOUSE: always reports core events
    25.847] (**) evdev:  USB OPTICAL MOUSE: Device: "/dev/input/event1"
    25.847] (--) evdev:  USB OPTICAL MOUSE: Vendor 0x2188 Product 0xae1
    25.847] (--) evdev:  USB OPTICAL MOUSE: Found 3 mouse buttons
    25.847] (--) evdev:  USB OPTICAL MOUSE: Found scroll wheel(s)
    25.847] (--) evdev:  USB OPTICAL MOUSE: Found relative axes
    25.847] (--) evdev:  USB OPTICAL MOUSE: Found x and y relative axes
    25.847] (II) evdev:  USB OPTICAL MOUSE: Configuring as mouse
    25.847] (II) evdev:  USB OPTICAL MOUSE: Adding scrollwheel support
    25.847] (**) evdev:  USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    25.847] (**) evdev:  USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    25.847] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    25.847] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 11)
    25.847] (II) evdev:  USB OPTICAL MOUSE: initialized for relative axes.
    25.847] (**)  USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    25.847] (**)  USB OPTICAL MOUSE: (accel) acceleration profile 0
    25.847] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    25.847] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    25.847] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mouse0)
    25.847] (II) No input driver specified, ignoring this device.
    25.847] (II) This device may have been added with another device file.
    25.847] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
    25.847] (II) No input driver specified, ignoring this device.
    25.847] (II) This device may have been added with another device file.
    25.848] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
    25.848] (II) No input driver specified, ignoring this device.
    25.848] (II) This device may have been added with another device file.
    25.848] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
    25.848] (II) No input driver specified, ignoring this device.
    25.848] (II) This device may have been added with another device file.
    25.848] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
    25.848] (II) No input driver specified, ignoring this device.
    25.848] (II) This device may have been added with another device file.
    25.848] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event11)
    25.848] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
    25.848] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
    25.848] (**) Lenovo EasyCamera: Applying InputClass "LocalKeyboard"
    25.848] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
    25.848] (**) Lenovo EasyCamera: always reports core events
    25.848] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event11"
    25.848] (--) evdev: Lenovo EasyCamera: Vendor 0x4f2 Product 0xb2e2
    25.848] (--) evdev: Lenovo EasyCamera: Found keys
    25.848] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
    25.848] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input11/event11"
    25.848] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 12)
    25.848] (**) Option "xkb_rules" "evdev"
    25.848] (**) Option "xkb_model" "evdev"
    25.848] (**) Option "xkb_layout" "us"
    25.849] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    25.849] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    25.849] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    25.849] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
    25.849] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    25.849] (**) AT Translated Set 2 keyboard: always reports core events
    25.849] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    25.849] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    25.849] (--) evdev: AT Translated Set 2 keyboard: Found keys
    25.849] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    25.849] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    25.849] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    25.849] (**) Option "xkb_rules" "evdev"
    25.849] (**) Option "xkb_model" "evdev"
    25.849] (**) Option "xkb_layout" "us"
    25.849] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event2)
    25.849] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    25.849] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    25.849] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    25.849] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    25.849] (II) LoadModule: "synaptics"
    25.850] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
    25.850] (II) Module synaptics: vendor="X.Org Foundation"
    25.850] 	compiled for 1.13.2, module version = 1.6.3
    25.850] 	Module class: X.Org XInput Driver
    25.850] 	ABI class: X.Org XInput driver, version 18.0
    25.850] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    25.850] (**) ETPS/2 Elantech Touchpad: always reports core events
    25.850] (**) Option "Device" "/dev/input/event2"
    25.871] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436
    25.871] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044
    25.871] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    25.871] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    25.871] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
    25.871] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    25.871] (**) Option "HorizScrollDelta" "0"
    25.871] (**) Option "TapButton1" "1"
    25.871] (**) Option "TapButton2" "3"
    25.871] (**) Option "TapButton3" "2"
    25.871] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    25.871] (**) ETPS/2 Elantech Touchpad: always reports core events
    25.877] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
    25.877] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
    25.878] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    25.878] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
    25.878] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.075
    25.878] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    25.878] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    25.878] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    25.878] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    25.878] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    25.879] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
    25.879] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    25.879] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
    25.879] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
    25.879] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
    25.879] (**) Ideapad extra buttons: Applying InputClass "LocalKeyboard"
    25.879] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
    25.879] (**) Ideapad extra buttons: always reports core events
    25.879] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event8"
    25.879] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
    25.879] (--) evdev: Ideapad extra buttons: Found keys
    25.879] (II) evdev: Ideapad extra buttons: Configuring as keyboard
    25.880] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input8/event8"
    25.880] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
    25.880] (**) Option "xkb_rules" "evdev"
    25.880] (**) Option "xkb_model" "evdev"
    25.880] (**) Option "xkb_layout" "us"
    25.880] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
    25.880] (II) No input driver specified, ignoring this device.
    25.880] (II) This device may have been added with another device file.
    43.250] (II) intel(0): EDID vendor "LGD", prod id 828
    43.250] (II) intel(0): Printing DDC gathered Modelines:
    43.250] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
    46.043] (II) intel(0): EDID vendor "LGD", prod id 828
    46.043] (II) intel(0): Printing DDC gathered Modelines:
    46.043] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
    65.140] (II) intel(0): EDID vendor "LGD", prod id 828
    65.140] (II) intel(0): Printing DDC gathered Modelines:
    65.140] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
   115.308] (II) AIGLX: Suspending AIGLX clients for VT switch
  1668.063] (II) AIGLX: Resuming AIGLX clients after VT switch
  1668.073] (II) intel(0): EDID vendor "LGD", prod id 828
  1668.073] (II) intel(0): Printing DDC gathered Modelines:
  1668.073] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
  1668.103] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found

粗粗看了下貌似 X 没啥问题的样子。

楼主打算放弃 N 卡了么?可以尝试官方最新驱动,安装很方便的。

放弃 N 卡。感觉 i5 核显可以胜任 linux 下所有应用

刚刚粗粗看了一下,楼主 lspci 结果中有两个显卡。判断楼主用的是 Optimus 技术的显卡。

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 3D controller: NVIDIA Corporation Device 1140 (rev a1)

不知道楼主有没有看 openSUSE wiki 中的 optimus 词条?
zh.opensuse.org/SDB:Bumblebee
我用的不是 Optimus 技术的显卡,所以对该条目只是粗略的看了看。不过还是希望能帮上楼主的忙。

注意,尊重玛格丽特的劳动,整个词条都是她编辑的。
zh.opensuse.org/index.php?title=SDB:Bumblebee&action=history

嗯,现在不死机了,黑线还是无法解决。不过谢谢大家了。现在删掉驱动用得也还好。我有空去试一下新的 N 卡驱动。

黑线可以试一下添加 vga=0x314 参数。

具体 vga 参数列表见:

doc.opensuse.org/documentation/html/openSUSE/opensuse-reference/grub2.html